• Uses either two RS5405 or two RS7405 Stabilizers for twice the control forces*
• 1/4-in. thick, high-strength, low-alloy steel axle bracket
• Direct bolt-up to factory and most aftermarket tie rods
• Direct bolt-up to factory steering linkage
• Black powder-coat finish
• Kit includes brackets with hardware
• The installation of this kit requires a 2-in. lift minimum with at least 2-in. tall front bump stop spacers. This prevents the Steering Stabilizer from contacting other components at full jounce travel.

• 1/4-in. High-strength low-alloy steel construction
• Works with RS5000™ or RS7000MT™ Series Stabilizers
• Black powder-coat finish
• CNC cut or bent
• All mounting hardware included
• Direct bolt-up to factory steering linkage
• Designed for dual steering stabilizer

• Requires the use of Rancho® Suspension kit RS6510, RS6511, RS6524B or RS6525B
• 1/4-in. High-strength low-alloy steel construction
• Works with RS5000™ or RS7000MT™ Series Stabilizers
• Black powder-coat finish
• CNC cut or bent
• All mounting hardware included
• Direct bolt-up to factory steering linkage
• Designed for dual steering stabilizer
• The installation of this kit requires a 2-in lift minimum with at least 2-in tall front bump stop spacers. This prevents the steering stabilizer from contacting other components at full jounce travel.

• Requires the use of Rancho® Suspension kit RS6553 or RS6653
• 1/4-in. High-strength low-alloy steel construction
• Works with RS5000™ or RS7000MT™ Series Stabilizers
• Black powder-coat finish
• CNC cut or bent
• All mounting hardware included
• Direct bolt-up to factory steering linkage
• Designed for dual steering stabilizer

• Uses either two RS5405 or two RS7405 Stabilizers for twice the control forces*
• 1/4-in. thick, high-strength low-alloy steel axle bracket
• Direct bolt-up to factory and most aftermarket tie rods
• Direct bolt-up to factory steering linkage
• Black powder-coat finish
• Kit includes brackets with hardware *stabilizers purchased separately

• Compressed Length: 12
• Extended Length: 20.125
• Travel Length: 8.125
• Lower Mounting Code: S42
• Upper Mounting Code: S42

*All measurements are in inches. Boot/Dust Shield end is upper.

• Compressed Length: 14.125
• Extended Length: 23.25
• Travel Length: 9.125
• Lower Mounting Code: LS24
• Upper Mounting Code: L1

*All measurements are in inches. Boot/Dust Shield end is upper.

• Compressed Length: 14.5
• Extended Length: 24.375
• Travel Length: 9.875
• Lower Mounting Code: LS38
• Upper Mounting Code: L1

*All measurements are in inches. Boot/Dust Shield end is upper.

• Compressed Length: 12
• Extended Length: 20.125
• Travel Length: 8.125
• Lower Mounting Code: S42
• Upper Mounting Code: S42

*All measurements are in inches. Boot/Dust Shield end is upper.