Shock Absorbers

Year	Make	Model	Drive

RS64102

Rancho Dual Steering Damper Bracket
Rancho® Dual Steering Stabilizer Brackets are designed to help you mount two Steering Stabilizers to your lifted Jeep® JL without any modifications. They are made of high-strength, low-alloy steel and include the mounting hardware for an easy installation.
- Uses either two RS5405 or two RS7405 Stabilizers for twice the control forces*
- 1/4-in. thick, high-strength, low-alloy steel axle bracket
- Direct bolt-up to factory and most aftermarket tie rods
- Direct bolt-up to factory steering linkage
- Black powder-coat finish
- Kit includes brackets with hardware
- The installation of this kit requires a 2-in. lift minimum with at least 2-in. tall front bump stop spacers. This prevents the Steering Stabilizer from contacting other components at full jounce travel.
RS64450

Rancho Dual Steering Damper Bracket
- 1/4-in. High-strength low-alloy steel construction
- Works with RS5000™ or RS7000MT™ Series Stabilizers
- Black powder-coat finish
- CNC cut or bent
- All mounting hardware included
- Direct bolt-up to factory steering linkage
- Designed for dual steering stabilizer
RS64551

Rancho Dual Steering Damper Bracket
- Requires the use of Rancho® Suspension kit RS6510, RS6511, RS6524B or RS6525B
- 1/4-in. High-strength low-alloy steel construction
- Works with RS5000™ or RS7000MT™ Series Stabilizers
- Black powder-coat finish
- CNC cut or bent
- All mounting hardware included
- Direct bolt-up to factory steering linkage
- Designed for dual steering stabilizer
- The installation of this kit requires a 2-in lift minimum with at least 2-in tall front bump stop spacers. This prevents the steering stabilizer from contacting other components at full jounce travel.
RS64550

Rancho Dual Steering Damper Bracket
- Requires the use of Rancho® Suspension kit RS6553 or RS6653
- 1/4-in. High-strength low-alloy steel construction
- Works with RS5000™ or RS7000MT™ Series Stabilizers
- Black powder-coat finish
- CNC cut or bent
- All mounting hardware included
- Direct bolt-up to factory steering linkage
- Designed for dual steering stabilizer
RS64101

Rancho Dual Steering Damper Bracket
- Uses either two RS5405 or two RS7405 Stabilizers for twice the control forces*
- 1/4-in. thick, high-strength low-alloy steel axle bracket
- Direct bolt-up to factory and most aftermarket tie rods
- Direct bolt-up to factory steering linkage
- Black powder-coat finish
- Kit includes brackets with hardware *stabilizers purchased separately
RS98508

Rancho Dual Steering Damper Kit
- Compressed Length: 12
- Extended Length: 20.125
- Travel Length: 8.125
- Lower Mounting Code: S42
- Upper Mounting Code: S42
*All measurements are in inches. Boot/Dust Shield end is upper.
RS98511

Rancho Dual Steering Damper Kit
- Compressed Length: 14.125
- Extended Length: 23.25
- Travel Length: 9.125
- Lower Mounting Code: LS24
- Upper Mounting Code: L1
*All measurements are in inches. Boot/Dust Shield end is upper.
RS98509

Rancho Dual Steering Damper Kit
- Compressed Length: 14.5
- Extended Length: 24.375
- Travel Length: 9.875
- Lower Mounting Code: LS38
- Upper Mounting Code: L1
*All measurements are in inches. Boot/Dust Shield end is upper.
RS98501

Rancho Dual Steering Damper Kit
- Compressed Length: 12
- Extended Length: 20.125
- Travel Length: 8.125
- Lower Mounting Code: S42
- Upper Mounting Code: S42
*All measurements are in inches. Boot/Dust Shield end is upper.
RS98510

Rancho Dual Steering Damper Kit
- Compressed Length: 12.625
- Extended Length: 21.625
- Travel Length: 9
- Lower Mounting Code: L1
- Upper Mounting Code: S42
*All measurements are in inches. Boot/Dust Shield end is upper.