Rancho® Performance Suspension & Shocks

New Products


Select a Vehicle



Items 11 to 20
of 126 total

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

  1. Rancho Coil Spring Kit

    Rancho®’s Jeep® Wrangler JL corner-specific progressive rate Coil Springs are specifically tuned to provide superior on-road comfort and off-road performance. The corner-specific Springs ensure your Jeep JL maintains a perfectly level stance and ride – even during towing or heavy loading. These Rancho JL Front Coil Springs provide up to 3.5-in. of lift height on a Rubicon and up to 4.5-in. of height on a Non-Rubicon. The addition of aftermarket bumpers, sliders, winches, etc. will net differences in lift height. 4 Door models only.
    • Up to 3.5-in. or 4.5-in. lift height depending on application
    • Corner-specific progressive rate tuned specifically for the Jeep Wrangler JL
    • Superior on-road comfort and off-road performance
    • Designed to allow for the use of larger wheel/tire combinations without body or fender modification
    • Requires the use of RS62123, a coil spring isolator

    Rancho Coil Spring Kit - RS80127B
    VEHICLE FITMENT
  2. Rancho Coil Spring Kit

    Rancho®’s Jeep® Wrangler JL corner-specific progressive rate Coil Springs are specifically tuned to provide superior on-road comfort and off-road performance. The corner-specific Springs ensure your Jeep JL maintains a perfectly level stance and ride – even during towing or heavy loading. These Rancho JL Front Coil Springs provide up to 3.5-in. of lift height on a Rubicon and up to 4.5-in. of height on a Non-Rubicon. 2 Door models, or the addition of aftermarket bumpers, sliders, winches, etc. will net differences in lift height.
    • Up to 3.5-in. or 4.5-in. lift height depending on application
    • Corner-specific progressive rate tuned specifically for the Jeep Wrangler JL
    • Superior on-road comfort and off-road performance
    • Designed to allow for the use of larger wheel/tire combinations without body or fender modification

    Rancho Coil Spring Kit - RS80128B
    VEHICLE FITMENT
  3. Rancho RS9000XL Shock Absorber

    • Compressed Length: 18.17
    • Extended Length: 29.38
    • Travel Length: 11.21
    • Lower Mounting Code: LS38
    • Upper Mounting Code: LS38
    *All measurements are in inches. Boot/Dust Shield end is upper.

    Rancho RS9000XL Shock Absorber - RS999316
    VEHICLE FITMENT
  4. Rancho RS9000XL Shock Absorber

    • Compressed Length: 16.56
    • Extended Length: @ DRS Contact: 21.96
      @ DRS Fully Engaged: 23.63
    • Travel Length: 7.07
    • Lower Mounting Code: LS38
    • Upper Mounting Code: LS97
    *All measurements are in inches. Boot/Dust Shield end is upper.

    Rancho RS9000XL Shock Absorber - RS999063
    VEHICLE FITMENT
  5. Rancho RS9000XL Shock Absorber

    • Compressed Length: 17.81
    • Extended Length: @ DRS Contact: 24.40
      @ DRS Fully Engaged: 26.06
    • Travel Length: 8.25
    • Lower Mounting Code: LS38
    • Upper Mounting Code: LS97
    *All measurements are in inches. Boot/Dust Shield end is upper.

    Rancho RS9000XL Shock Absorber - RS999064
    VEHICLE FITMENT
  6. Rancho Differential Glide Plate - Dana 44 - Front

    Rancho® front and rear Differential Glide Plates for the Jeep® Wrangler JL mount to the front or rear axle casting, and allow for a much smoother glide over obstacles forward and backwards. These Glide Plates protect your differential casting from direct contact in severe offroad conditions. Works with OE and most aftermarket differential covers. Manfactured from 1/4-in. high-strength, low-alloy steel and covered in a durable red powder-coated finish.

    • Mounts to front or rear axle casting
    • Protects casting from direct contact
    • Works with O.E. and most aftermarket differential covers
    • Durable red powder-coated finish
    • Allows for a much smoother glide over obstacles - forwards and backwards

    Rancho Differential Glide Plate - Dana 44 - Front - RS62116
    VEHICLE FITMENT
  7. Rancho Rear Shock and Control Arm Skid

    Rancho® JL Rear Shock and Control Arm Skids are designed to protect your JL control arms and shock absorbers from rocks and other obstacles. Made from 1/4-in. high-strength, low-alloy steel, these skids will glide over obstacles and keep you moving down the trail. The Rancho Rear Shock and Control Arm Skids bolt-on using the shock and supplied control arm bolts, and are powder coated in a durable Rancho Red. Driver and passenger side skids included.

    • Mounts to rear lower control arm and shock bolt
    • Constructed of durable 1/4-in. HSLA steel and powder coated Rancho Red
    • All hardware included for installation
    • Prevents damage to suspension components
    • Sold as a pair

    Rancho Rear Shock and Control Arm Skid - RS62125
    VEHICLE FITMENT
  8. 2018 Jeep Wrangler JL Unlimited NON-Rubicon 4WD - 3.5-in. Sport Suspension System w/RS5000X Shocks

    3.5-in. SPORT SYSTEM
    • Suspension System Lift Height: 3.5"
    • Suspension System Color: Black
    2018 Jeep Wrangler JL Unlimited NON-Rubicon 4WD - 3.5-in. Sport Suspension System w/RS5000X Shocks - RS66124BR5

    2018 Jeep Wrangler JL Unlimited NON-Rubicon 4WD - 3.5-in. Sport Suspension System w/RS5000X Shocks - RS66124BR5
    VEHICLE FITMENT
  9. Rancho Coil Spring Isolator

    Correct the spring bow of your aftermarket performance suspension system front coil springs with this Rancho® Coil Spring Isolator for the 2018 Jeep® Wrangler JL. Some companies lifted front coil springs that utilize the factory isolator may flex resulting in a bow which could cause it to rub against the frame. Rancho’s JL Coil Spring Isolator corrects this issue.

    • Corrects the bow of the front aftermarket lifted coil spring
    • Installs quickly without specialized tools
    • Kit includes two lower front Coil Spring Isolators

    Rancho Coil Spring Isolator - RS62123
    VEHICLE FITMENT
  10. Rancho Control Arm Geometry Correction Brackets

    Rancho® Jeep® JL Geometry Correction Brackets deliver perfect fit, finish and performance. These next-level Rancho Jeep JL Geometry Correction Brackets keep the control arms at factory angles to deflect road harshness, reduce brake dive and allow for proper caster angle after the addition of an aftermarket lift kit…maximizing the performance of your Jeep Wrangler JL. This NEW bracket fits Jeeps running lift kits from 2 - 4.5-inches utilizing our unique 3-hole upper control arm locator. Rancho engineering fit and finish delivers a one-piece welded design that will bolt-up directly to the factory locations out of the box, saving you time and aggravation.

    • Compatible with 2 door, 4 door, non-Rubicon, and Rubicon Models
    • Works on 2 - 4.5-inch lift kits that utilize factory upper and lower control arms
    • Corrects control arm alignment geometry to factory specs eliminating the need for adjustable control arms or cam bolts for caster correction
    • Fixed adjustment location for each height with an option for additional caster if needed
    • One-piece welded design with a durable, black power-coated finish
    • No assembly required! Out of box and on to your Jeep…an easy DIY project!
    • Installs easily – 100-percent bolt-on system and detailed, full-color installation guide included!

    Rancho Control Arm Geometry Correction Brackets - RS62118B
    VEHICLE FITMENT

Items 11 to 20
of 126 total

Set Ascending Direction
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5